DPI Grease The best bearings can show optimum performance only when they are lubricated properly. It is therefore important to choose the right bearing grease. Grease is a vital component of the bearing design and thus, as important as the bearing, housing and sealing.
Our strict standards and testing parameters have helped us develop the most suitable and effective DPI bearing grease. Our General Purpose DPI Lithium Bearing Grease – DGMT 3 is second to none and the quality is comparable to the best bearings greases products in the world.
DGMT 3 is a Superior Quality, general purpose Grease. It can be used for a wide range of Industrial and Automotive Applications. It is a Lithium Soap Complex Lubricating Grease for all types of Rolling Bearings and Relative Moving parts. This premium quality, general purposes grease is suitable for a wide range of industrial and automotive applications
- • Exceptionally long grease life.
- • Outstanding Oxidation Stability.
- • High Mechanical Stability.
- • Excellent Water Resistance
- • Good Anti-wear Properties
- • Good Rust Prevention Properties
- • General Industrial Equipment
- • General Household appliances
- • Conveyor Systems
- • Building Machine and Equipments
- • Rolling Equipment’s of low speed and high load
- • Water Pumps
- • Textile Machines
- • Industrial Fans
- • Agricultural equipment
- • Car, Buses, Truck and Trailer wheel bearings
- • 2 – 3 Wheeler Motorcycles
- • Large electric motors
- • 250 Gms
- • 500 Gms
- • 1 Kg
- • 3 Kg
|S.No||Test Parameters||Test Method||Results|
|04||Colour||Visual||Pale Light Yellow|
|05||Drop Point º C||ASTM D 566||196|
|06||Service Temperature||– 30 to 120 C- 22 to 250 F|
|07||Base Oil Viscosity @ 100 º C||ASTM D 445||12|
|08||Flash Point of Base Oil º C||ASTM D 92||235|
|09||Worked Penetration @ 25 º C 60 X||ASTM D 217||233|
|10||Working Stability 60/100000 X||ASTM D 217||–|
|11||Copper Corrosion 24hrs 100 º C||ASTM D 4048||Negative|
|12||Free Acidity (Oleic) by mass||ASTM D 128||NIL|
|13||Free Alkali as Ca (OH2) % by mass||ASTM D 12||0.0051|
|14||Leakage and Deposit Forming Tendencies (Wheel Bearing Test) Leakage in gms. Depositions on racer roller Evidence of abnormal changes in consistency / Structure||ASTM D 1263||Pass|
|15||Heat Stability||IS: 1448F 189||2.15|
|16||Water Content % by Mass||ASTM D 95||Nil|
|17||Resistance to water washes out at C % by mass||ASTM D 1264||7.80|
|18||Roll Stability Test Penetration change % after 2 Hrs||ASTM D 1831||3.10|